Nokta Makro Software Updates

Updating the Software on Your Nokta Makro Metal Detector

in Serious Detecting Blog
Navigate to Nokta Makro The Legend Page Select Software Update Software updates are available for the Windows and MacOS operating systems. Important: If you experience any issues opening the setup file, please disable all anti-virus programs on your PC. The latest update includes all previous updates. Download the zip file for your operating system.

VERY IMPORTANT!

Please follow the instructions below for the update: 1. Install the exe file. 2. Close the exe file. 3. With The Legend turned off, connect it to your computer. 4. You must hear the alert sound on the computer indicating that the device is detected by the computer. If not, remove and connect again. 5. With the detector still off, press and hold the up button until you see the letters ‘’UP’’ on the screen, then let the button go. 6. Run the exe file. 7. Select the bin file. 8. Once the update button becomes active, press it. 9. The letters "UP" will be erased from the screen and you will see numbers counting from 1-100. 10. Once the update is done the letters LD will come up on the screen. If your coil is connected, the device will turn on. If not, it will say CC and shut down. Nokta Makro Software Update Video Tutorial :
Navigate to Nokta Makro Simplex+ Page Select Software Update Operating systems: Windows XP (with SP3), Vista, Windows 7, 8 or 10. Important: SIMPLEX+ CAN NOT BE ROLLED BACK TO 2.77 OR ANY PREVIOUS FIRMWARE VERSIONS. If you experience any issues opening the setup file, please disable all anti-virus programs on your PC. The latest update includes all previous updates. Download the zip file for your operating system. Nokta Makro Simplex+ Software Update Video Tutorial:

0 comments

Leave a Reply

Your email address will not be published. Required fields are marked *