XP Deus II Instruction Manual Digital

The manual provides the following information for these programs. Additionally, All 12 factory programs (1 to 12) will return to their original value every time the remote is turned off and restarted.

Program 8 – Gold Field

FMF – Max. freq. ~ 40kHz – Frequency Addition

Gold Field is intended for highly mineralized gold-bearing ground. Gold nuggets are often seen as the ground or ferrous items in these tricky environments. It is set to “all metal” for deeper detection and only rejects the localized ground to which you should regularly adjust by Grabbing (see Ground). It will accept ground above and below your Ground setting.

• Discriminate the surface ferrous items with the IAR Discrimination setting (see Discrimination > IAR).
• Increase the Reactivity when searching strong mineralization for greater stability.

Program 9 – Relic

FMF – Max. freq. ~ 24kHz – Frequency Subtraction

Relic is processed in the same way as Program 8 – Gold Field, but uses lower subtracted frequencies to search for large masses, It is configured for “all metal” with low Reactivity and only rejects the localized ground to which you should regularly adjust by Grabbing (see Ground). It will accept ground above and below this ground setting.

• To search for deep large masses: Sweep well above the ground, e.g. 15 or 20 cm, to avoid being hindered by shallow ferrous items and above all the ground effects that may distort deeper signals. You will then be able to identify deep masses by the longer sounds. Depending on the ground and your patience, reducing the Reactivity to 0 will offer a huge advantage in order to gain greater depth.