Quest Wireless Audio Transmitter for Garrett AT Series Metal Detectors

The transmitter provides three ways to attach it to your detector: You can clip it on the rod or magnet stick on your control box, or even hang it on a piece of metal detector cloth, so you can take it off easily to charge.

It fits all Garrett AT series detectors. The digital audio processor enables it to transfer the best quality signal to the chosen Quest headphones. The wireless controller is water resistant so you don’t have to worry about it getting splashed on.

The transmitter provides three ways to attach it to your detector: You can clip it on the rod or magnet stick on your control box, or even hang it on a piece of metal detector cloth, so you can take it off easily to charge.

It fits all Garrett AT series detectors. The digital audio processor enables it to transfer the best quality signal to the chosen Quest headphones. The wireless controller is water resistant so you don't have to worry about it getting splashed on.

Features

• Transfer original, no distortion audio signal
• Only 0.06s delay
• Splash-proof structure
• 1 touch button control
• 6 hours working time
• Spring cable
• Easy to attach & secure
• USB rechargeable
• No interference with VLF PI detectors

Specifications

Transmitter:

• Transmitter Cable: 10inches / 25cm straight+5cm coil
• Connector: Garret AT series audio connector.
• Attachment: Clip onto rod, magnetic attach
• Protection level: Splash-proof
• Control: One touch button
• Accessories: Adapter, USB recharging cable, mounting gear.
• Weight: 1.4oz / 33gr