Quest Deus WS4 Compatible Wireless Headphones
For Use with the Deus WS4 Wireless Unit
No tools required to install original WS4 back-neck headsets to our Headphone.
Transfer original, no distortion audio signal. Better mechanical lock system design than original one, won’t snap. Rainproof protection design Most comfortable over-ear headphones for metal detecting Easy servicing – all parts replaceable Close structure for better noise isolation Super lightweight for long time wearing Come with audio output for connect with detector thru wire.
Upgrade your XP metal detector with these wireless headphones!
If you have been looking for a set of over-the-head headphones that accepts the WS4 puck, look no further.
Unlike the other after-market headphones that have been adapted to accept the WS4 puck using the adapter plate, the Quest HD’s were designed for the Deus from the ground up. A comfortable, solidly fitting pair of headphones has been designed around an inset that accepts the WS4 puck. This inset is not found on any other aftermarket headphones and ensures that the puck will not inadvertently come off when caught by a branch in the woods since it is flat with the outer piece of the headphone.
The sound quality is clear and emulates the sound of the original WS4 backphones from XP.
- Rainproof protection design
- Better mechanical lock system design than original one, won’t snap, break or pop off inadvertently
- Easy servicing – all parts are replaceable
- Only 0.06s audio delay
- Close structure for better noise isolation
- Super lightweight for long time wearing
- Comes with 1/4″ to 1/8″ converter adapter
- Supports up to 8 hours continuous operation
- Transfer original signal, no distortion audio signal
- Transducer type: Dynamic
- Operating principle: Closed
- Frequency response: 20–20,000Hz
- Nominal impedance: 32Ω
- Sound pressure level: 111dB
- Power handling capacity: 100 mW
- Max. sound pressure level: 131 dB
- Sound coupling to the ear: Supra-aural
- Headband pressure: 3.0N
- Wireless technology: Digital 2.4GHz
- Paring type: Manually Digital
- Weight: 320G
- Charging: USB 2.0
- Power: 3.7VDC
- Current: 40mA
- Attaching: Clip on rod, magnetic attach
- Protection level: Splash-proof
- Control: One touch button
- Accessories: Carry bag, adapter, charging cables & instruction manual.
- Weight: 60gr
- Connector: For metal detector with 1/4″ or 6.35mm jack
***XP DEUS WS4 MODULE pictured is for demo purposes and it is NOT included.